|
|
Plot can be used to add a new curve to an existing graph created with Plot or to change the way it is displayed.
| Plot |
| [/xl <xlimit-low> <xlimit-high>] [/yl <ylimit_low> <ylimit_high>] [/xdelta <xdelta>] [/ydelta <ydelta>] |
| [/ylabel <ylabel>] [/xlabel <xlabel>] [/yunit <yunit>] [/xunit <xunit>] [/title graph-title] |
| [/xlog] [/ylog] [/loglog] [/dig] [/new] [/select] [/name] [/autoxlog] [/autoylog] |
| [/xauto] [/yauto] [/newaxis] [/newgrid] [/axisid <id>] [/autoaxis] [/bus hex|dec|decsigned|bin ] |
| [<y-expression>] [<x-expression>] |
|
/autoAxis |
Does nothing. For compatibility with the command Curve. |
|
/autoXlog |
If specified, the x-axis will be logarithmic if the x-values are logarithmically spaced. |
|
/autoYlog |
Same as /autoxlog except that if x-values are logarithmically spaced, the Y axis will be logarithmic. |
|
/axisid |
Does nothing. For compatibility with the command Curve. |
|
/bus |
Specifies that the curve is displaying a bus value. |
|
/dig |
If specified, the curve will be plotted on a digital axis. Digital axes are stacked on top of main axes and are sized and labelled appropriately for digital waveforms. |
|
/loglog |
Forces both y and x axes to be logarithmic. |
|
/name |
If specified, curve will be named curve-name . |
|
/new |
Opens a new graph window. |
|
/newAxis |
Does nothing. For compatibility with the command Curve. |
|
/newGrid |
Does nothing. For compatibility with the command Curve. |
|
/newSheet |
Creates a new empty sheet. Does not plot any curves. |
|
/select |
If specified, the new curve will be selected. |
|
/title |
Specify title of graph with graph-title . |
|
/xauto |
Does nothing. For compatibility with the command Curve. |
|
/xdelta |
Specify spacing between major grid lines on x-axis with real value xdelta . For default spacing use '0'. |
|
/xl |
Specify fixed limit for x-axis, xlimit-low is a real value stating the lower limit of the x-axis, whilst xlimit-high is a real value stating the higher limit of the x-axis. |
|
/xlabel |
Specify label for the x-axis with xlabel . |
|
/xlog |
Forces logarithmic x-axis, only effective when graph sheet is empty. |
|
/xunit |
Specify units for x-axis (Volts, Watts etc.) with string xunit . If it contains spaces, the whole string must be enclosed in quotes (""). You should not include an engineering prefix (m, K etc.). |
|
/yauto |
Does nothing. For compatibility with the command Curve. |
|
/ydelta |
Specify spacing between major grid lines on y-axis with real value ydelta . For default spacing use '0'. |
|
/yl |
Specify fixed limit for y-axis, ylimit-low is a real value stating the lower limit of the y-axis, whilst ylimit-high is a real value stating the higher limit of the y-axis. |
|
/ylabel |
Specify label for the y-axis with ylabel . |
|
/ylog |
Forces logarithmic y-axis, only effective when graph sheet is empty. |
|
/yunit |
Specify units for y-axis (Volts, Watts etc.) with string yunit . If it contains spaces, the whole string must be enclosed in quotes (""). You should not include an engineering prefix (m, K etc.). |
|
y-expression |
Expression describing curve to be added to graph. |
|
x-expression |
Expression describing x values of curve defined by y expression. If omitted, reference of y_expression will be used. |
|
|
||