DVM - Design Verification Module
|
DVM - Design Verification Module
|
The DC auxiliary source models a simple DC voltage source with series resistance. This source is commonly used to enable and disable AC/DC power supplies in the ControlStartup() Test Objective.
Model Name |
DC Auxiliary Source |
|
Simulator |
|
This device is compatible with both the SIMetrix and SIMPLIS simulators. |
Parts Selector |
DVM ▶Source ▶Aux. Source |
|
Symbol Library |
None - the symbol is automatically generated when placed or edited. |
|
Model File |
SIMPLIS_DVM_ADVANCED.lb |
|
| Subcircuit Name | SIMPLIS_DVM_ADVANCED_SOURCE_AUX_DC | |
| Schematic |  |
|
The following table explains the relevant parameters.
| Parameter Name | Default | Data Type | Range | Units | Parameter Description |
DC_VOLTAGE |
5 | Real | V | DC voltage of input source |
|
SOURCE_NAME |
SRC | String | n/a | n/a | Name of the DVM source. This name cannot contain spaces. |
SOURCE_RESISTANCE |
0.4 | Real | min:0 | Ω | Sets the source resistance of the source. |
To set any DVM Aux source to a DC Source subcircuit, place a Dc() testplan entry in the Source column.
The Dc() testplan entry has the following syntax with the arguments explained in the table below.
Dc(REF, DC_VOLTAGE)
| Argument | Range | Description |
REF |
n/a |
The actual reference designator of the Aux DVM source. |
DC_VOLTAGE |
min: 0 |
The DC Voltage of the source.. |
© 2015 simplistechnologies.com | All Rights Reserved
