baseschematic: ..\..\..\..\..\..\..\..\DVM_PFC_Continuous_Conduction_Mode.sxsch
log_file: ..\..\..\..\..\..\dvm_advanced.log
simulator: simplis
screenshot: schematic.png
deck: input.deck
init: input.deck.init
test_argument: Transient|LineDropout|HL_Nominal|F_Low|1Cycles|100% Load
datetimestamp: 2/7/2015 10:56:48 AM
status: RUN
feature: DVM PFCOutput#tran
spec: Max_VPFCOutput=fail,Max. Output1 Voltage (472.886) is not less than or equal to Max. Output1 Voltage Spec (420)
scalar: Min(VPFCOutput in Reg.)=395.407
scalar: Max(VPFCOutput in Reg.)=404.857
scalar: Avg(VPFCOutput in Reg.)=400.153
scalar: RMS(VPFCOutput in Reg.)=400.167
scalar: Min(IPFCOutput in Reg.)=494.259m
scalar: Max(IPFCOutput in Reg.)=506.072m
scalar: Avg(IPFCOutput in Reg.)=500.191m
scalar: RMS(IPFCOutput in Reg.)=500.209m
spec: Min_VPFCOutput_reg=pass,Min. Output1 Voltage in Reg. (395.407) is greater than or equal to Min. Output1 Voltage Spec (380)
spec: Max_VPFCOutput_reg=pass,Max. Output1 Voltage in Reg. (404.857) is less than or equal to Max. Output1 Voltage Spec (420)
scalar: vout1_recovery_time=26.214m
spec: Max_VPFCOutput_overshoot=fail,Max. Overshoot Output1 Voltage (472.886) is not less than or equal to Max. Overshoot Output1 Voltage Spec (420)
scalar: Frequency(Line)=50
scalar: Max(ILine Inrush Current)=8.00358
scalar: RMS(ILine)=889.978m
scalar: RMS(VLine After Dropout)=230
spec: Max_ILine_Inrush=pass,Max. Inrush Current after Dropout for Line (8.00358) is less than or equal to Max. Inrush Spec of (15)
feature: DVM Line,-1
scalar: Min(VPFCOutput During Dropout)=345.946
scalar: Max(VPFCOutput overshoot)=472.886
spec: Min_VPFCOutput_during_Dropout=pass,Min. Voltage during Dropout for PFCOutput (345.946) is greater then or equal to the Min. Dropout Voltage Spec of (340)
feature: DVM PFCOutput,1
scalar: VPFCOutput %_diff_last_2_linecycles=0.00590989%
spec: AC_Settling(PFCOutput)=pass, Voltage across PFCOutput has settled to (59.0989u) % and is less than or equal to Max Settling Spec of (10m) %
scalar: Avg(VPFCOutput Last LineCycle)=400.141
scalar: Avg(VPFCOutput Previous LineCycle)=400.165
scalar: VPFCOutput %_diff_last_2_linecycles=0.00590989%
scalar: Avg(VPFCOutput At Simulation Start Time)=400.083
stats: N/A
numgraphs: 3
graphid: 324
graphname: AC#tran
sg: simplis_tran10_324
path: simplis_tran10_324.sxgph
scalar: Min(VPFCOutput)=345.946
scalar: Max(VPFCOutput)=472.886
scalar: Min(IPFCOutput)=432.433m
scalar: Max(IPFCOutput)=591.107m
graphid: 330
graphname: DVM PFCOutput#tran
sg: simplis_tran10_330
path: simplis_tran10_330.sxgph
curve334:VPFCOutput,FF0000
curve345:IPFCOutput,008000
png: simplis_tran10_330.png
scalar: Min(VLine)=-325.42
scalar: Max(VLine)=325.178
scalar: Min(ILine)=-1.4557
scalar: Max(ILine)=8.00358
graphid: 335
graphname: DVM Line#tran
sg: simplis_tran10_335
path: simplis_tran10_335.sxgph
curve339:VLine,FF0000
curve347:ILine,008000
png: simplis_tran10_335.png
rstatus: FAIL