|
|
This is a list of predefined buttons that can be used with DefineToolBar for creating custom toolbars.
| Button Name | Graphic | Function |
|---|---|---|
| AddCurve | newcurve.bmp | Add Curve |
| AddFourier | newfourier.bmp | Fourier... |
| CalcAveragePower | avg.bmp | Display Average Power/Cycle |
| CalcFall | falltime.bmp | Display Fall Time |
| CalcHighPass3db | 3dbhighpass.bmp | Display -3dB Point (High Pass) |
| CalcLowPass3db | 3dblowpass.bmp | Display -3dB Point (Low Pass) |
| CalcRise | risetime.bmp | Display Rise Time |
| CalcRMS | rms.bmp | Display RMS/Cycle |
| Capacitor | cap.bmp | Place Capacitor |
| Copy | copy.bmp | Duplicate |
| Delete | erase.bmp | Cut |
| DeleteAxis | delgrid.bmp | Delete Axis/Grid |
| DeleteCurve | delete.bmp | Delete Curve |
| Diode | diode.bmp | Place Diode |
| Flip | flip.bmp | Flip |
| GraphClose | fileclose.bmp | Close Graph |
| GraphOpen | fileopen.bmp | Open Graph |
| GraphSave | filesave.bmp | Save Graph |
| Ground | gnd.bmp | Place Ground |
| HideCurves | hide.bmp | Hide Selected Curves |
| IGBT | igbt.bmp | Place IGBT |
| Inductor | ind.bmp | Place Inductor |
| IProbe | iprobe.bmp | Place Current Probe |
| ISource | isource.bmp | Place Current Source |
| Mirror | mirror.bmp | Mirror |
| MoveCurve | movecurve.bmp | Move Curve to Selected Axis/Grid |
| NewAxis | newaxis.bmp | New Axis |
| NewGrid | newgrid.bmp | New Grid |
| NJFET | njfet.bmp | Place N-channel JFET |
| NMOS | nmos.bmp | Place N-channel MOSFET |
| NMOS3IC | nmos_ic3.bmp | Place 3 term Nchannel MOSFET |
| NMOS4 | nmos_ic.bmp | Place 4 term Nchannel MOSFET |
| NPN | npn.bmp | Place NPN Transistor |
| Opamp | opamp.bmp | Place Opamp |
| Options | options.bmp | Options |
| PJFET | pjfet.bmp | Place P-channel JFET |
| PMOS | pmos.bmp | Place P-channel MOSFET |
| PMOS3IC | pmos_ic3.bmp | Place 3 term Pchannel MOSFET |
| PMOS4 | pmos_ic.bmp | Place 4 term Pchannel MOSFET |
| PNP | pnp.bmp | Place PNP Transistor |
| print.bmp | ||
| PSU | psu.bmp | Place PSU |
| Resistor | res.bmp | Place Resistor (Box shape) |
| ResistorZ | resz.bmp | Place Resistor (Z shape) |
| Rotate | rotate.bmp | Rotate |
| SatInd | sat_ind.bmp | Place Saturable Inductor |
| SatTx | tx_sat.bmp | Place Saturable Transformer |
| SchemClose | fileclose.bmp | Close Schematic |
| SchemNew | newschem.bmp | New Schematic |
| SchemOpen | fileopen.bmp | Open Schematic |
| SchemSave | filesave.bmp | Save Schematic |
| SchemSaveAll | saveall.bmp | Save All Schematics |
| SCR | scr.bmp | Place Thyristor |
| ShowCurves | show.bmp | Show Selected Curves |
| SimPause | pause.bmp | Pause Simulation |
| SimRunNetlist | run.bmp | Run Netlist |
| SimRunSchem | run.bmp | Run Schematic |
| SymbolNew | newsymbol.bmp | New Symbol |
| TitleCurve | curvetitle.bmp | Change Curve Name |
| TL | tl.bmp | Place Transmission Line |
| Tx | tx.bmp | Place Transformer |
| Undo | undo.bmp | Undo |
| UndoZoom | undo.bmp | Undo Zoom |
| VProbe | vprobe.bmp | Place Voltage Probe |
| VSource | vsource.bmp | Place Voltage Source |
| Waveform | vsig.bmp | Place Waveform Generator |
| Wire | pencil.bmp | Wire Mode |
| Zener | zener.bmp | Place Zener Diode |
| ZoomFull | zoomfull.bmp | Fit Window |
| ZoomIn | zoomin.bmp | Zoom In |
| ZoomOut | zoomout.bmp | Zoom Out |
| ZoomRect | zoomrect.bmp | Zoom Box |
| ZoomXAuto | zoomwidth.bmp | Fit Width |
| ZoomYAuto | zoomheight.bmp | Fit Height |
|
|