***
*** 6.4.1_alias.testplan: alias testplan for DVM tutorial section 6.4.1
***
*?@ analysis	objective	jumper	measurement	measurement	measurement	source	load	label
***
Ac	BodePlot(OUTPUT:1)	Close(J1)	"Alias(gain_margin,gain_margin_nom)"	"Alias(phase_margin,phase_margin_nom)"	"Alias(gain_crossover_freq,gain_crossover_freq_nom)"	"Source(INPUT:1, Nominal)"	"Load(OUTPUT:1, Light)"	VOUT=1.505V|Bode Plot|Vin Nominal|Light Load
Ac	BodePlot(OUTPUT:1)	Close(J1)	"Alias(gain_margin,gain_margin_nom)"	"Alias(phase_margin,phase_margin_nom)"	"Alias(gain_crossover_freq,gain_crossover_freq_nom)"	"Source(INPUT:1, Nominal)"	"Load(OUTPUT:1, 50%)"	VOUT=1.505V|Bode Plot|Vin Nominal|50% Load
Ac	BodePlot(OUTPUT:1)	Close(J1)	"Alias(gain_margin,gain_margin_nom)"	"Alias(phase_margin,phase_margin_nom)"	"Alias(gain_crossover_freq,gain_crossover_freq_nom)"	"Source(INPUT:1, Nominal)"	"Load(OUTPUT:1, 100%)"	VOUT=1.505V|Bode Plot|Vin Nominal|100% Load
***
***	these tests use the new modified values
***
Ac	BodePlot(OUTPUT:1)	Open(J1)	"Alias(gain_margin,gain_margin_600mV)"	"Alias(phase_margin,phase_margin_600mV)"	"Alias(gain_crossover_freq,gain_crossover_freq_600mV)"	"Source(INPUT:1, Maximum)"	"Load(OUTPUT:1, Light)"	VOUT=0.6V|Bode Plot|Vin Maximum|Light Load
Ac	BodePlot(OUTPUT:1)	Open(J1)	"Alias(gain_margin,gain_margin_600mV)"	"Alias(phase_margin,phase_margin_600mV)"	"Alias(gain_crossover_freq,gain_crossover_freq_600mV)"	"Source(INPUT:1, Maximum)"	"Load(OUTPUT:1, 50%)"	VOUT=0.6V|Bode Plot|Vin Maximum|50% Load
Ac	BodePlot(OUTPUT:1)	Open(J1)	"Alias(gain_margin,gain_margin_600mV)"	"Alias(phase_margin,phase_margin_600mV)"	"Alias(gain_crossover_freq,gain_crossover_freq_600mV)"	"Source(INPUT:1, Maximum)"	"Load(OUTPUT:1, 100%)"	VOUT=0.6V|Bode Plot|Vin Maximum|100% Load
***