DVM Tutorial
|
A Suppress testplan column allows you to inhibit post-processing results from the simulation run. The following table describes the functions that you can place in a Suppress column.
Note: If you want
to use multiple functions for any one test, you place each suppress function
in a separate column in the testplan.
Function | Description |
NoCurves() |
Removes curves for specified reference designator from images in the DVM report. The NoCurves() function is illustrated in 6.4.1 Suppressing Curve Generation. For syntax information, see NoCurves() in the DVM testplan documentation. |
NoScalars() |
Suppresses scalar measurements for the specified source or
load reference designator. The NoScalars() function is illustrated in 6.4.2 Suppressing Scalar Generation. For syntax information, see NoScalars() in the DVM testplan documentation. |
NoSpecs() |
Suppresses specification checking for the specified source
or load of the reference designator. The NoSpecs() function is illustrated in 6.4.3 Suppressing Specification Generation. For syntax information, see NoSpecs() in DVM testplan documentation. |
© 2015 simplistechnologies.com | All Rights Reserved