This section of the tutorial deals with the order of the grids in the waveform viewer.
4.2.1 Change the Grid Order
To change the order of the grids, use the 7_SIMPLIS_tutorial_buck_converter.sxsch
example from section 4.1 Output Curves to Separate Grids and follow these
steps:
- Close the waveform viewer; return to the schematic editor and double click the
VOUT probe.
- In the Display order section in the lower left corner below Arbitrary
string to specify order, type A in the text box.
![](../../library/images/simplis_tutorial/1.3.0_moving_curves_dialog_3.png)
Note: Since the SW curve is on the default grid, you do not need to specify
the order for the SW probe.
Note: Any string which is alphanumerically less
than IL will move the VOUT grid above the IL grid. The sort algorithm is
case insensitive.
- Click Ok, and then press F9 to rerun the simulation.
Result: The new waveform viewer should now have the curves in the new
order with VOUT above IL.
4.2.2 Save your schematic
To save your schematic, follow these steps:
- Click anywhere in the schematic to bring the schematic viewer in to focus.
- Select .
- Navigate to your working directory where you are saving your schematics.
- Name the file 8_my_buck_converter.sxsch.
A schematic saved at this state can be downloaded here: 8_SIMPLIS_tutorial_buck_converter.sxsch.
▲ back to top