|
n1, n2 etc.
|
Subcircuit nodes |
|
pin1, pin2 etc.
|
If the pinnames: keyword is included the names following it will be used to name subcircuit current vectors generated by the simulator.
|
|
subcircuit_name
|
Subcircuit name referred to in subcircuit definition (i.e. with .SUBCKT statement)
|
|
m
|
Multiplier. If present, the subcircuit will be multiplied by m as if there were m devices in parallel. m may be an expression in which case it must be enclosed by curly braces: '{', '}'.
Note that the multiplication is performed by scaling the internal devices not by actually replicating the subcircuit. Non integral values of m are thus permitted. Some types of device can not currently be scaled and subcircuits containing them will not support M. An error will displayed in this case.
M will be interpreted as a regular parameter and will not scale the subcircuit instance if M is declared as a parameter in the .SUBCKT line or the following option setting is included in the netlist:
.OPTIONS DisableSubcktMultiplier
|
|
expression1 etc.
|
Parameter expressions. See Using Expressions.
|