Square Waveform Source

The Square Waveform Source subcircuit models a repeating square wave source voltage with zero rise and fall times. This source is not used in any test objectives, but you can set a source to use this subcircuit with a Squ() call in the Source column of your testplan.

Other similar pulsed voltage sources include:

Similar pulsed sources which have only a single pulse include:

In this topic:

Model Name Square Waveform Source
Simulator This device is compatible with both the SIMetrix and SIMPLIS simulators.
Parts Selector
Menu Location
DVM > Sources > DVM Input Source
Symbol Library None - the symbol is automatically generated when placed or edited.
Model File SIMPLIS_DVM_ADVANCED.lb
Subcircuit Name SIMPLIS_DVM_ADVANCED_SOURCE_SQU
Symbols
Schematic

Parameters

The following table explains the relevant parameters.

Parameter Name Default Data Type Range Units Parameter Description
FINAL_VOLTAGE 750m Real   V The peak or final voltage for the source pulse. This can be a numeric value or a symbolic value, such as a percentage of nominal input voltage.
FREQUENCY 10k Real min: > 0 Hz The frequency of the source pulse
IDLE_IN_POP 0 Real 0 or 1   If set to 0, the source voltage during the POP analysis is set to the START_VOLTAGE; otherwise the source will be active during the POP analysis.
SOURCE_NAME SRC String n/a n/a Name of the DVM source. This name cannot contain spaces.
OFF_UNTIL_DELAY 0 Real 0 or 1   If set to 1, the source voltage will be the START_VOLTAGE until the time specified by TIME_DELAY. If set to 0, the value of TIME_DELAY is interpreted as a phase delay.
PHASE_ANGLE 90 Real   ° The phase angle of the voltage pulse, used only if the USE_PHASE parameter is 1.
START_VOLTAGE 0 Real   V The lower or starting voltage for the source voltage pulse. This can be a numeric value or a symbolic value, such as a percentage of nominal input voltage.
TIME_DELAY 10u Real min: 0 s The delay before the source voltage pulse starts. The source behavior before the TIME_DELAY is determined by the OFF_UNTIL_DELAY parameter.
USE_PHASE 0 Real 0 or 1   If set to 1, the source is configured to use the phase angle supplied by the PHASE_ANGLE parameter.

Testplan Entry for the Square Waveform Source

To set any managed DVM source to a Square Waveform Source subcircuit, place a Squ() testplan entry in the Source column.

The Squ() testplan entry has the following syntax with the arguments taken from the list of Parameters above.

Squ(REF, START_VOLTAGE, FINAL_VOLTAGE, FREQUENCY)
Squ(REF, START_VOLTAGE, FINAL_VOLTAGE, FREQUENCY, OPTIONAL_PARAMETER_STRING)
Argument Range Description
REF n/a The actual reference designator of the DVM source or the more generic syntax of INPUT:n where n is an integer indicating a position in the list of DVM sources
START_VOLTAGE n/a The lower or starting voltage for the square-wave source. This can be a numeric value or a symbolic value, such as a percentage of nominal input voltage.
FINAL_VOLTAGE n/a The peak or maximum voltage for the square-wave source. This can be a numeric value or a symbolic value, such as a percentage of nominal input voltage.
FREQUENCY min: > 0 The frequency of the square-wave source
OPTIONAL_PARAMETER_STRING n/a Parameter string with any of the other parameters from the parameter table above*

*    If multiple parameters are specified, join the parameter key-value pairs with a space, as shown in the examples below. The order of the parameter names does not matter.

Examples

The following examples set the first DVM managed source to a Square Waveform Source with a starting voltage of 0V and a final voltage of 5V. The timing parameters and the optional parameter strings are different for each example.

Note: In the following testplans, the Source column is prefaced with the characters *?@ because it is the first column in the testplan.

Zero Time Delay Example

Since the TIME_DELAY parameter is set to zero, the square wave begins with the FINAL_VOLTAGE value of 5 at t=0.

*?@ Source
Squ(INPUT:1, 0, 5, 10k, TIME_DELAY=0)

The results of this testplan entry are shown below:

Time Delay Example

In this example, the TIME_DELAY parameter is set to 75us. Since the OFF_UNTIL_DELAY parameter is not specified, the TIME_DELAY is interpreted as a phase delay.

*?@ Source
Squ(INPUT:1, 0, 5, 10k, TIME_DELAY=75u)

The results of this testplan entry are shown below:

Time Delay Example With OFF_UNTIL_DELAY=1

In this example the TIME_DELAY parameter is set to 75us, and the OFF_UNTIL_DELAY is set to 1; therefore, for simulation times less than the TIME_DELAY parameter, the source voltage is 0V, which is the value of the START_VOLTAGE argument.

*?@ Source
Squ(INPUT:1, 0, 5, 10k, TIME_DELAY=75u OFF_UNTIL_DELAY=1)
The results of this testplan entry are shown below: