6.4 Suppress Testplan Entries

A Suppress testplan column allows you to inhibit post-processing results from the simulation run. The following table describes the functions that you can place in a Suppress column.  

Note: If you want to use multiple functions for any one test, you place each suppress function in a separate column in the testplan.
Function Description
NoCurves() Removes curves for specified reference designator from images in the DVM report.  The NoCurves()  function is illustrated in 6.4.1 Suppressing Curve Generation. For syntax information, see NoCurves() in the DVM testplan documentation.
NoScalars() Suppresses scalar measurements for the specified source or load reference designator.

The NoScalars() function is illustrated in 6.4.2 Suppressing Scalar Generation. For syntax information, see NoScalars() in the DVM testplan documentation.

NoSpecs() Suppresses specification checking for the specified source or load of the reference designator.

The NoSpecs() function is illustrated in 6.4.3 Suppressing Specification Generation. For syntax information, see NoSpecs() in DVM testplan documentation.