The BSIM-BULK model is available with the Elite versions of SIMetrix
The BSIM-BULK MOSFET model is designed for integrated circuit development for analog and RF applications. The BSIM-BULK model was developed by The BSIM Group, located in the Department of Electrical Engineering and Computer Sciences (EECS) at the University of California, Berkeley.
Documentation for the model may be found at the SIMetrix web site. See Further Documentation
In this topic:
Mxxx drain gate source bulk [temperature] modelname instance_parameters
.model modelname NMOS ( LEVEL=77 VERSION=106 parameters )
.model modelname PMOS ( LEVEL=77 VERSION=106 parameters )
One version of the model is currently available. This is version 106.2. This may be accessed using parameters LEVEL=77 and VERSION=106.
The device may have 4 or 5 terminals with the netlist format as shown above.
Self heating will be modelled if the parameter SHMOD is non-zero and RTH0 is greater than zero. If the temperature node is present it can be used to add a thermal network. If omitted, an internal temperature node labelled t will be used to implement self-heating effects. This node can be probed using the name REF#t. For example, if the device has the reference M23, the internal temperature node may be accessed using the name M23#t. To access internal nodes the KeepInternal option setting must be set. See Option Settings
This model may be binned on length and width in a similar manner to the BSIM3 model. See Model Binning.
| ◄ BSIM4 MOSFETs | BSIM-CMG MOSFET (FinFET) ▶ |