PlaceCursor Command

Positions graph cursors if they are enabled.

PlaceCursor [/main x-main y-main] [/datum x-datum y-datum]

Parameters

/datum

Location of reference cursor. Position is determined by x-datum . y_datum is only used for non-monotonic curves (e.g. nyquist plots) where there is more than one y value for a given x value.

/main

Location of main measurement cursor. Position is determined by x-main . y-main is only used for non-monotonic curves (e.g. Nyquist plots) where there is more than one y value for a given x value.